Fragrance Lampe Instructions

1. Set your Scentier™ Lampe on a level, stable surface away from any heat or flammable objects Remove the open/vented shade and solid cap.

2. Fill your Scentier™ Lampe approximately 2/3’s full with Lampe Parfum using funnel cap provided.
Dry Lampe Carefully!

3. Insert the burner/wick into your Scentier™ Lampe. Carefully check to make sure burner/wick is fully inserted into Lampe neck.

4. The first time you use your Scentier™  replace the solid cap and allow the burner/wick to absorb fragrance for 20 minutes.  Light the burner, leaving flame to burn for 2 minutes.

5. Blow out the flame. Your Scentier™ Lampe is now operating. Replace the open/vented shade over the burner. 25 to 45 minutes operating is sufficient for 300 sq. feet.

6. To stop your Scentier™ Lampe remove the open/vented shade from the burner. Replace the solid cap on burner. Replace open/vented shade on solid cap.

Lampe Recommendations

• Replace burner / wick assembly once a year or after every 250 uses.

• When not using your Scentier™ Fragrance Lampe keep solid cap on stone to prevent the evaporation of fragrance.

• Keep Scentier™ Fragrance Lampe as well as refill perfume out of the reach of Children. If swallowed seek medical attention immediately.

Perfume is highly flammable, use extreme care when handling!

Use Scentier™ Fragrance Parfum refill only in Scentier™ Fragrance Lampes